Glues and Arrow Cleaners

Black High-Viscosity Rubber Toughened;Carbon and Aluminum Shafts;.008″ Gap Filler;Shock-Resistant;3700psi Strength;Military Grade;Quick Bonding +/- 30 Seconds;Temp Rated -65F – +280F

Cyanoacrylate gel adhesive designed to be used with plastic;Instantly bonds nocks and vanes permanently to aluminum and carbon shafts;Remove by cutting

Complete adhesion kit for vanes and fletching;Max Bond Glue (20 grams) for a strong, long-lasting hold;MAXweld Primer Pen enhances adhesion performance;Max Clean Wipes ensure a contaminant-free surface for bonding;Ideal for all arrow shaft and vane types;Easy-to-use system for a secure and professional finish

Nock and vane glue with a special formula for AAE Plastifletch Max and Max Hunter vanes;Will also work on most other type vanes

Hot Melt Adhesive For Arrow Points And Inserts;Strong, Flexible Bond;Weather- And Temperature-Resistant Performance;Compatible With Aluminum, Carbon, Fiberglass Arrows;Bonds With A Wide Range Of Points And Inserts;Applies With Torch Or 150 W Minimum Glue Gun

Cleans base of vane;Allows for maximum adhesion;Designed for vanes with a urethane base

Two part epoxy for gluing nock and point inserts into aluminum shafts;Package design proportions amounts automatically;Designed for use with carbon and aluminum;Twenty-four hour full cure

High viscosity;For loose fitting joints;Available in sizes: .5 oz., 1 oz.

High viscosity;For loose fitting joints;Available in sizes: .5 oz., 1 oz.

Fast set;Does not get brittle;For use on points and inserts

Extra thick;Fast set;For fletching or inserts;Available in sizes: .5 oz., 1 oz., 2 oz.

Extra thick;Fast set;For fletching or inserts;Available in sizes: .5 oz., 1 oz., 2 oz.

Clear bottle with applicator tip designed to hold 2 oz of solvent or adhesive;Comes with red cap for air tight seal

For use with Zing fletching glue;Eliminates the need to clean the base of Flex Fletch vanes before fletching;Speeds up set and cure times for fast set glues

Insert glue with rubber additive to allow glue joint to absorb more shock

High performance grade glue that is stronger and formulated to bond feathers and vanes to the arrow;Available in sizes: .5oz., 1.0oz., 2.0oz., .7gm

High performance grade glue that is stronger and formulated to bond feathers and vanes to the arrow;Available in sizes: .5oz., 1.0oz., 2.0oz., .7gm

Fast drying, long lasting glue that works with feathers, vanes, nocks and inserts;Works with all type shafts: aluminum, carbon, glass and even wood;When using it on wooden shafts, we recommend using the accelerator;Available in sizes: .5oz., 1.0oz., 2.0oz., .7gm

Fast drying, long lasting glue that works with feathers, vanes, nocks and inserts;Works with all type shafts: aluminum, carbon, glass and even wood;When using it on wooden shafts, we recommend using the accelerator;Available in sizes: .5oz., 1.0oz., 2.0oz., .7gm

Increases vane adhesion; No mixing required; Removes dirt, oil & debris from arrow shafts; Quick-dry formula

Stainless steel glue tip;Provides pin-point accruate glue beads;Easy to clean

Removes CA-style adhesives, vanes, and arrow wraps;Soak method allows components to release after 45 minutes or longer;Adhesive residue wipes away with minimal effort;Reusable formula for repeated use;Slow evaporation helps extend usable life;Eliminates scraping or grinding during arrow prep;Supports efficient refletching and maintenance

Bonds vanes, feathers, or plastic to aluminum, glass or wood shafts